The Toyota engine is designed with a 3-belt system that operates the motor. Due to age or utilization, these belts can turn into brittle and break, requiring them to get replaced. To be able to exchange the alternator belt, it’s a must to additionally take away the power steering and air-con belts as properly. You are able to do this your self with just a bit effort in about one or two hours and save the expense and time concerned in having another person do it for you.
Toyota Alternator Belt Installation Instructions
Disconnect the battery cables out of your Toyota battery with an open-finish wrench and pliers and take away the battery from the engine for simpler entry to the power steering pump. Find the belt tensioner bolt that’s beneath the power steering pump of your Toyota engine. Use an open-finish wrench to show the tensioner bolt till the power steering pump is unfastened. Observe how the belt is looped across the power steering pump and different pulleys as a way to put it again on precisely because it got here off. Remove the belt from the power steering pump and set it apart for now.
Find the engine cowl that sits over the A/C compressor and take away it utilizing a socket wrench, then loosen the adjustment screw on the air conditoner with a socket wrench till the belt is unfastened. Then take away it from the pulleys. Discover the alternator mounting bolt and use an open-finish wrench to loosen the bolt, then loosen the tensioner bolt that can be related to the alternator.
Remove the alternator belt when the tensioner bolt has been loosened sufficient that you could take the belt off simply. Notice how the belt was positioned across the pulleys so you’ll be able to exchange it simply. Place the brand new alternator belt across the pulleys and tighten the alternator tensioner bolt with an open-finish wrench till the belt is tight. Tighten up the alternator mounting bolt with the open-finish wrench and test the belt to confirm it’s nonetheless tight. If essential, tighten the tensioner bolt once more till the belt is correctly adjusted.
Place the A/C belt again across the pulleys and tighten the adjustment bolt with a socket wrench till the belt is adjusted correctly. Reattach the engine cowl that sits over the A/C compressor with a socket wrench. Reattach the power steering belt of your Toyota engine by looping it again round every of the pulleys after which tightening the power steering pump tensioner bolt with the open finish wrench till the belt is tight.
Place the battery again into the Toyota car and reattach the battery cables. Activate the engine and confirm that the belts are working correctly after which shut the engine off when you’re happy.
[taken from ehow.com]
